Typical Dishwasher Repairs and How Best to Handle Them

How did you live without a dishwasher? When problems arise and the appliance gets broken you will soon find out. There are a few common dishwasher repairs that most people see at some point in the life of the appliance. Find out what the problem likely is and what the best way is to handle them.

When Your Dishwasher Won’t Fill Up
If your dishwasher is not filling up with water there is likely a problem with the incoming water supply. This could be the fault of a clogged water intake valve or a faulty float mechanism. Alternatively the timer switch, pressure switch or water inlet valve could be faulty and require replacement kenmore dishwasher repair altadena.

When Your Dishwasher Won’t Drain
A small amount of clean water in the bottom of the appliance is quite normal. However, if you see an excessive amount of water or if it is dirty there is a problem and dishwasher repairs are necessary. Typically when your dishwasher doesn’t drain there is an issue with the drain line being clogged, a faulty drain valve or clogged sink trap.

When Your Dishwasher Is Noisy
There will always be a certain amount of noise coming from your dishwasher, but clunking, banging and loud buzzing is not a good sign. Typical dishwasher repairs needed when the noise level gets too loud include levelling the feet for better balance and replacing the inlet valve.

When Your Dishwasher Leaks
The source of this problem often depends on where your dish leaks. It could be a faulty door gasket or the fact that the door is improperly tightened. These problems cause water to leak through the door vent. Alternatively, water leaking from under the appliance could be leaky pipes and hoses or possibly a faulty pump seal. Corrosion can also cause a dishwasher to leak, but generally this problem can’t be repaired and requires a replacement appliance.

When Your Dishwasher Doesn’t Turn On
Most often this is an electrical problem. It could involve the wiring on the appliance, the outlet it is plugged into or faulty electrical connections within the appliance itself.

All of these issues are beyond the skills of the average handyman or woman. When plumbing and electrical are involved your best bet is to have the dishwasher repairs handled by a qualified professional. They should be able to fix anything from the hoses and plumbing to the electrical of the appliance. If plumbing or electrical issues are occurring outside of the dishwasher, an appliance engineer should be able to direct you to a qualified professional for that type of repair as well.

Leave a Reply

Your email address will not be published. Required fields are marked *